- Global
- English
Protettivi anticorrosione
La gamma MT PROTECT di MotulTech soddisfa i requisiti di prestazioni, durabilità e salute e sicurezza degli operatori. Formulata con la più recente generazione di additivi anticorrosione e solventi deodorizzati, la gamma MT PROTECT soddisfa i requisiti di prestazioni, durabilità e salute e sicurezza degli operatori. La gamma MotulTech di protettivi anticorrosione, formulata con additivi privi di bario, offre una serie di soluzioni ad alte prestazioni per la protezione metallurgica industriale. Tutti i prodotti di protezione a base di solvente della gamma hanno, innanzitutto, un'azione idrorepellente. Ciò consente l'applicazione di composti anticorrosione su una superficie perfettamente asciutta, il primo passo per una protezione efficace contro la corrosione. La scelta del prodotto sarà quindi fatta in base alla durata della protezione desiderata, alle condizioni di stoccaggio e trasporto della parte, e alla velocità di asciugatura del protettivo anticorrosione.
Corrosion protection for water-repellent fluids
Water-repellent or dewatering fluids are conventionally applied by immersion to wet parts. They remove residual water from upstream processes (machining operations using a soluble fluid or degreasing with a detergent, etc.). The immersion tank must be adapted with a system for draining accumulated water.
Parts immersed in a water-repellent fluid can come out dry, without residue, or, depending on requirements, with a protective film against corrosion. This protective film may be imperceptible, waxy, oily, or even greasy.
All products in the MT Protect range contain active substances that work to separate water from the parts by depositing a protective film.
Solvent-based corrosion protection product
These corrosion protection products have low surface tension, allowing them to act on parts with complex geometries by reaching the most difficult areas (blind holes, hollow bodies) to deposit the protective film evenly. They can be applied with a paintbrush, brush, by immersion, or by spraying.
Different levels of protection and finish (thin film, thick film, waxy film) are possible depending on the active ingredient content. They can be easily removed using a solvent or alkaline detergent. The MT Protect range meets performance, durability, and operator health and safety requirements by selecting solvents that are free of aromatics and chlorine.
Water-repellent anti-corrosion oils
Anti-corrosion protective oils are available in different viscosities and with different levels of protection depending on their additive content.
Unlike solvent-based protective products, water-repellent protective oils do not evaporate and leave an oily film on the part, protecting it from oxidation and atmospheric attack. They can be applied with a paintbrush, brush, by immersion, or by spraying.
Their use is recommended for storage in warehouses and hangars, as well as during transport with suitable secondary packaging.
Water-repellent anti-corrosion oils can be easily removed using alkaline detergents or solvents.
Aqueous anti-corrosion fluids
MotulTech offers aqueous concentrates to provide temporary protection against corrosion.
These products are generally used between two machining operations to provide short-term temporary protection. When diluted in water, they leave a passivating film that protects metals against corrosion.
This is an alternative to using an oil-based or solvent-based protective fluid to protect parts between two operations.
This more economical range improves working conditions in terms of hygiene and safety (barium-free, boron-free, formaldehyde-free, VOC-free).